17 foot hunter sailboat

10 Best Small Sailboats (Under 20 Feet)

Last Updated by

Daniel Wade

December 28, 2023

Compact, easy to trailer, simple to rig, easy to maintain and manage, and affordable, the best small boats all have one thing in common: they offer loads of fun while out there on the water.

So whether you're on a budget or just looking for something that can offer ultimate daytime rides without compromising on safety, aesthetic sensibilities, alternate propulsion, and speed, the best small sailboats under 20 feet should be the only way to go.

Let's be brutally honest here; not everyone needs a 30-foot sailboat to go sailing. They come with lots of features such as electronics, entertainment, refrigeration, bunks, a galley, and even a head. But do you really need all these features to go sailing? We don't think so.

All you need to go sailing is a hull, a mast, rudder, and, of course, a sail. And whether you refer to them as daysailers, trailerable sailboats , a weekender sailboat, or pocket cruisers, there's no better way to enjoy the thrills of coastal sailing than on small sailboats.

There are a wide range of small boats measuring less than 20 feet available in the market. These are hot products in the market given that they offer immense thrills out on the sea without the commitment required to cruise on a 30-footer. A small sailboat will not only give you the feel of every breeze but will also give you the chance to instantly sense every change in trim.

In this article, we'll highlight 10 best small sailboats under 20 feet . Most models in this list are time-tested, easy to rig, simple to sail, extremely fun, and perfect either for solo sailing or for sailing with friends and family. So if you've been looking for a list of some of the best small sailboats , you've come to the right place.

So without further ado, let's roll on.

Table of contents

{{boat-info="/boats/hunter-15"}}

The Marlow-Hunter 15 is not only easy to own since it's one of the most affordable small sailboats but also lots of fun to sail. This is a safe and versatile sailboat for everyone. Whether you're sailing with your family or as a greenhorn, you'll love the Hunter 15 thanks to its raised boom, high freeboard, and sturdy FRP construction.

With high sides, a comfortable wide beam, a contoured self-bailing cockpit, and fiberglass construction, the Hunter 15 is certainly designed with the novice sailor in mind. This is why you can do a lot with this boat without falling out, breaking it, or capsizing. Its contoured self-baiting cockpit will enable you to find a fast exit while its wide beam will keep it steady and stable no matter what jibes or weight shifts happen along the way.

This is a small sailboat that can hold up to four people. It's designed to give you a confident feeling and peace of mind even when sailing with kids. It's easy to trailer, easy to rig, and easy to launch. With a price tag of about $10k, the Hunter 15 is a fun, affordable, and versatile boat that is perfect for both seasoned sailors and novices. It's a low-maintenance sailboat that can be great for teaching kids a thing or two about sailing.

Catalina 16.5

{{boat-info="/boats/catalina-16-5"}}

Catalina Yachts are synonymous with bigger boats but they have some great and smaller boats too such as Catalina 16.5. This is one of the best small sailboats that are ideal for family outings given that it has a big and roomy cockpit, as well as a large storage locker. Designed with a hand-laminated fiberglass sloop, the Catalina 16.5 is versatile and is available in two designs: the centerboard model and the keel model.

The centerboard model is designed with a powerful sailplane that remains balanced as a result of the fiberglass centerboard, the stable hull form, and the rudder. It also comes with a tiller extension, adjustable hiking straps, and adjustable overhaul. It's important to note that these are standard equipment in the two models.

As far as the keel model is concerned, this is designed with a high aspect keel as the cast lead and is attached with stainless steel keel bolts, which makes this model perfect for mooring or docking whenever it's not in use. In essence, the centerboard model is perfect if you'll store it in a trailer while the keel model can remain at the dock.

All in all, the Catalina 16.5 is one of the best small sailboats that you can get your hands on for as low as $10,000. This is certainly a great example of exactly what a daysailer should be.

{{boat-info="/boats/hobie-16"}}

There's no list of small, trailerable, and fun sailboats that can be complete without the inclusion of the classic Hobie 16. This is a durable design that has been around and diligently graced various waters across the globe since its debut way back in 1969 in Southern California. In addition to being durable, the Hobie 16 is trailerable, great for speed, weighs only 320 pounds, great for four people, and more importantly, offers absolute fun.

With a remarkable figure of over 100,000 launched since its debut, it's easy to see that the Hobie 16 is highly popular. Part of this popularity comes from its asymmetric fiberglass-and-foam sandwiched hulls that include kick-up rudders. This is a great feature that allows it to sail up to the beach.

For about $12,000, the Hobie 16 will provide you with endless fun throughout the summer. It's equipped with a spinnaker, trailer, and douse kit. This is a high-speed sailboat that has a large trampoline to offer lots of space not just for your feet but also to hand off the double trapezes.

Montgomery 17

{{boat-info="/boats/montgomery-17"}}

Popularly known as the M-17, The Montgomery 17 was designed by Lyle C. Hess in conjunction with Jerry Montgomery in Ontario, California for Montgomery Boats. Designed either with keel or centerboard models, the M-17 is more stable than most boats of her size. This boat is small enough to be trailered but also capable of doing moderate offshore passages.

This small sailboat is designed with a masthead and toe rail that can fit most foresails. It also has enough space for two thanks to its cuddly cabin, which offers a sitting headroom, a portable toilet, a pair of bunks, a DC power, and optional shore, and a proper amount of storage. That's not all; you can easily raise the deck-stepped mast using a four-part tackle.

In terms of performance, the M-17 is one of the giant-killers out there. This is a small sailboat that will excel in the extremes and make its way past larger boats such as the Catalina 22. It glides along beautifully and is a dog in light air, though it won't sail against a 25-knot wind, which can be frustrating. Other than that, the Montgomery 17 is a great small sailboat that can be yours for about $14,000.

Norseboat 17.5

{{boat-info="/boats/norseboat-17-5"}}

As a versatile daysailer, Norseboat 17.5 follows a simple concept of seaworthiness and high-performance. This small sailboat perfectly combines both contemporary construction and traditional aesthetics. Imagine a sailboat that calls itself the "Swiss Army Knife of Boats!" Well, this is a boat that can sail and row equally well.

Whether you're stepping down from a larger cruiser or stepping up from a sea kayak, the unique Norseboat 17.5 is balanced, attractive, and salty. It has curvaceous wishbone gaff, it is saucy, and has a stubby bow-sprit that makes it attractive to the eyes. In addition to her beauty, the Norseboat 17.5 offers an energy-pinching challenge, is self-sufficient, and offers more than what you're used to.

This is a small, lightweight, low-maintenance sailboat that offers a ticket to both sailing and rowing adventures all at the same time. At about 400 pounds, it's very portable and highly convenient. Its mainsails may look small but you'll be surprised at how the boat is responsive to it. With a $12,500 price tag, this is a good small sailboat that offers you the versatility to either row or sail.

{{boat-info="/boats/sage-marine-sage-17"}}

If you've been looking for a pocket cruiser that inspires confidence, especially in shoal water, look no further than the Sage 17. Designed by Jerry Montgomery in 2009, the Sage 17 is stable and should heel to 10 degrees while stiffening up. And because you want to feel secure while sailing, stability is an integral feature of the Sage 17.

This is a sailboat that will remain solid and stable no matter which part of the boat you stand on. Its cabin roof and the balsa-cored carbon-fiber deck are so strong that the mast doesn't require any form of compression post. The self-draining cockpit is long enough and capable of sleeping at 6 feet 6 inches.

The Sage 17 may be expensive at $25k but is a true sea warrior that's worth look at. This is a boat that will not only serve you right but will also turn heads at the marina.    

{{boat-info="/boats/laserperformance-laser-sb3"}}

Having been chosen as the overall boat of the year for 2008 by the Sailing World Magazine, the Laser SB3 is one of the coolest boats you'll ever encounter. When sailing upwind, this boat will lock into the groove while its absolute simplicity is legendary. In terms of downwind sailing, having this boat will be a dream come true while it remains incredibly stable even at extraordinary speed.

Since its debut in 2004, the Laser SB3 has surged in terms of popularity thanks to the fact that it's designed to put all the controls at your fingertips. In addition to a lightweight mast, its T- bulb keel can be hauled and launched painlessly. For about $18,000, the Laser SB3 ushers you into the world of sports sailing and what it feels to own and use a sports boat.

{{boat-info="/boats/fareast-18"}}

As a manufacturer, Fareast is a Chinese boat manufacturer that has been around for less than two decades. But even with that, the Fareast 18 remains a very capable cruiser-racer that will take your sailing to the next level. In addition to its good looks, this boat comes with a retractable keel with ballast bulb, a powerful rig, and an enclosed cabin.

Its narrow design with a closed stern may be rare in sailboats of this size, but that's not a problem for the Fareast 18. This design not only emphasizes speed but also makes it a lot easier to maintain this boat. Perfect for about 6 people, this boat punches above its weight. It's, however, designed to be rigged and launched by one person.

This is a relatively affordable boat. It's agile, safe, well-thought-out, well built, and very sporty.

{{boat-info="/boats/chuck-paine-paine-14"}}

If you're in the market looking for a small sailboat that offers contemporary performance with classic beauty, the Paine 14 should be your ideal option. Named after its famous designer, Chuck Paine, this boat is intentionally designed after the classic Herreshoff 12.5 both in terms of dimensions and features.

This is a lightweight design that brings forth modern fin keel and spade rudder, which makes it agile, stable, and faster. The Paine 14 is built using cold-molded wood or west epoxy. It has varnished gunnels and transoms to give it an old-time charm. To make it somehow modern, this boat is designed with a carbon mast and a modern way to attach sails so that it's ready to sail in minutes.

You can rest easy knowing that the Paine 14 will not only serve you well but will turn heads while out there.

{{boat-info="/boats/wd-schock-lido-14"}}

Many sailors will attest that their first sailing outing was in a Lido 14. This is a classic sailboat that has been around for over four decades and still proves to be a perfect match to modern small boats, especially for those still learning the ropes of sailing.

With seating for six people, the Lido 14 can be perfect for solo sailing , single-handed sailing, or if you're planning for shorthanded sailing. While new Lido 14 boats are no longer available, go for a functional used Lido 14 and you'll never regret this decision. It will serve you well and your kids will probably fall in love with sailing if Lido 14 becomes their main vessel during weekends or long summer holidays.

Bottom Line

There you have it; these are some of the best small sailboats you can go for. While there are endless small sailboats in the market, the above-described sailboat will serve you right and make you enjoy the wind.

Choose the perfect sailboat, invest in it, and go out there and have some good fun!

Related Articles

I've personally had thousands of questions about sailing and sailboats over the years. As I learn and experience sailing, and the community, I share the answers that work and make sense to me, here on Life of Sailing.

by this author

Best Sailboats

Most Recent

What Does "Sailing By The Lee" Mean?

October 3, 2023

The Best Sailing Schools And Programs: Reviews & Ratings

September 26, 2023

Important Legal Info

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.

Similar Posts

Affordable Sailboats You Can Build at Home

September 13, 2023

Best Small Sailboats With Standing Headroom

Best Bluewater Sailboats Under $50K

Popular posts.

Best Liveaboard Catamaran Sailboats

Can a Novice Sail Around the World?

Elizabeth O'Malley

June 15, 2022

4 Best Electric Outboard Motors

How Long Did It Take The Vikings To Sail To England?

10 Best Sailboat Brands (And Why)

December 20, 2023

7 Best Places To Liveaboard A Sailboat

Get the best sailing content.

Top Rated Posts

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies. (866) 342-SAIL

© 2024 Life of Sailing Email: [email protected] Address: 11816 Inwood Rd #3024 Dallas, TX 75244 Disclaimer Privacy Policy

Hunter Sailboats For Sale

4 listings found.

36 Hunter Vision 1993

Freshwater Only – 1989 Hunter 33.5 Sloop-Rigged Cruiser, Shoal Wing Keel

1978 Hunter 30 Cheurbini

Hunter 44 DS perfect to live aboard!

Hunter sailboats for sale on sailtrader, new hunter sailboats.

New hunter sailboats for sale come in a range of sizes for any sailor to enjoy. New Hunter sailboats are designed for stability and conformable performance. New designed Hunter’s have well-thought deck layout making it simple to sail shorthanded. 

Three new Hunter sailboat categories are: tailorable daysailor (15-20 ft), midsize keelboats (31-37 ft), large keelboats (40-50 ft). New hunter sailboat prices range from $10,123 for a 15 ft daysailor to $433,985 for the new 50′ center cockpit model. Prices can vary for each model depending on the options chosen by the buyer.

Used Hunter Sailboats

Find a range of used Hunter sailboats for sale on SailTrader with photos, prices and details from private sellers and dealers. For over 40 years Hunter has been manufacturing sailboats in North America which created many opportunities for sailors to find used Hunter available to buy.

SailTrader is a popular destination for sellers to list their Hunter sailboats for sale. Find used Hunter sailboat prices, photos and complete selling information. If you don’t find the information you’re looking for to buy, contact the seller for details.

Sailboats Privately Listed

SailTrader is the leading website for privately listed Hunter sailboats for sale. Many sailors often choose to sell their sailboat on their own. Sellers can easily create an account, list sailboat details, add photos and get contacted to potential buyers.

Hunter Sailboats For Sale by Dealer

With Hunter sailboats being as popular as they are, shoppers will often find Hunter sailboats for sale by dealers. Hunters are design to be enjoyed by a wide range of sailing skill sets. From weekend cruising to Wednesday night racing, a dealer can help you find the right Hunter sailboat for sale with the feature you need. With Hunters sailboat long history of sailboat manufacturing in North America there have been many different designs throughout the years. A dealer can help you navigate  sailboats with complicated systems.

Sell Your Hunter Sailboat

Aside from selling Hunter Sailboats, SailTrader encourages sailors looking to sell their Hunter sailboat to list them here too. It’s easy to do. Anyone can make a SailTrader account the and list a sailboat for sale.

The Sailor’s Marketplace for Sailboats and Sails.

Sell Your Sailboat

Sailboats for sale.

• New Sailboats
• Used Sailboats
• Cruising Sailboats
• Racing Sailboats

Sell Your Sails

Sails for sail, sail manufacturers.

• North Sails
• Quantum Sails
• Doyle Sails
• UK Sailmakers

Sailing Reviews

• Sailing Line
• Safety Equipment
• Sailing Accesories

As an Amazon Associate SailTrader earns from qualifying purchases.

This website uses cookies to ensure you get the best experience possible. 

• New Sailboats
• Sailboats 21-30ft
• Sailboats 31-35ft
• Sailboats 36-40ft
• Sailboats Over 40ft
• Sailboats Under 21feet
• used_sailboats
• Apps and Computer Programs
• Communications
• Fishfinders
• Handheld Electronics
• Plotters MFDS Rradar
• Wind, Speed & Depth Instruments
• Anchoring Mooring
• Running Rigging
• Sails Canvas
• Standing Rigging
• Diesel Engines
• Off Grid Energy
• Cleaning Waxing
• DIY Projects
• Repair, Tools & Materials
• Spare Parts
• Tools & Gadgets
• Cabin Comfort
• Ventilation
• Footwear Apparel
• Foul Weather Gear
• Mailport & PS Advisor
• Inside Practical Sailor Blog
• Activate My Web Access
• Reset Password
• Customer Service

• Free Newsletter

Mason 33 Used Boat Review

Beneteau 311, Catalina 310 and Hunter 326 Used Boat Comparison

Maine Cat 41 Used Boat Review

Cheoy Lee Clipper 36 & 42 Used Boat Review

Tips From A First “Sail” on the ICW

Tillerpilot Tips and Safety Cautions

Best Crimpers and Strippers for Fixing Marine Electrical Connectors

Thinking Through a Solar Power Installation

Stopping Mainsheet Twist

Working with High-Tech Ropes

Getting a Clue for the Blown-Out Clew

Monel Seizing Wire is Worth the Extra Cost

Fuel Lift Pump: Easy DIY Diesel Fuel System Diagnostic and Repair

Ensuring Safe Shorepower

Sinking? Check Your Stuffing Box

The Rain Catcher’s Guide

Boat Maintenance for the Technically Illiterate: Part 1

Whats the Best Way to Restore Clear Plastic Windows?

Mastering Precision Drilling: How to Use Drill Guides

Giving Bugs the Big Goodbye

Galley Gadgets for the Cruising Sailor

Those Extras you Don’t Need But Love to Have

UV Clothing: Is It Worth the Hype?

Preparing Yourself for Solo Sailing

How to Select Crew for a Passage or Delivery

Preparing A Boat to Sail Solo

On Watch: This 60-Year-Old Hinckley Pilot 35 is Also a Working…

On Watch: America’s Cup

On Watch: All Eyes on Europe Sail Racing

Dear Readers

Chafe Protection for Dock Lines

• Sailboat Reviews

Hunter 30: Still the Affordable Fantasy

Production coastal cruiser offers a lot of boat for not a lot of bucks..

Hunter Marine began building auxiliary sailboats in 1974, largely as the result of the first oil embargo and the new energy consciousness that followed. Founded by Warren Luhrs, Hunter began as a division of the powerboat-maker Silverton Yachts, which was interested in expanding its offerings and taking advantage of the new interest in saving fuel.

The companys aim was high-volume production, keeping prices low by standardizing design, making as few tooling changes as possible, and offering its boats fully equipped-while other companies were selling things like bow pulpits and lifelines as options on a 30-foot boat. The original Hunter boats were marketed as the affordable fantasy and came with sails, dock lines, fenders, life jackets, and fire extinguishers, in what Hunter called the Cruise Pak of standard features. About the only option available on the early Hunters was a choice of shoal- or deep-draft keel.

Photo by CeCe Stoldt

In 2012, Hunter Marine was sold to David Marlow, the builder of Marlow Yachts. With this change of ownership came a change in corporate goals and product offerings. Hunter Marine began-like its chief competitor, Catalina Yachts-with a small group of standardized models. From 1974 through 1977, it offered only the Hunter 25, 27, and 30 models, and from 1977 through 1979, the builder added only the 33 and 37. Today, Hunter-Marlow makes nine production models ranging from trailerable daysailors (15 to 22 feet) to mid-size (27 to 37 feet) and large (40 to 50 feet) keelboats.

Also, Hunters high-volume-production business model has been replaced with the Marlow ethos, which is more focused on yacht-level quality than production volume. Marlow-Hunter produces about 100 boats each year, including trailerable and cruising sailboats, as well as Mainship powerboats, according to Greg Emerson, Marlow-Hunters director of sales.

The Hunter 30

Designed by John Cherubini and built from 1974 to 1983, the Hunter 30 is a coastal cruiser that was designed to offer a lot of boat for little money. With a focus on streamlining construction to boost production volume, Hunter aimed to offer an affordable coastal racer-cruiser. More than 1,000 Hunter 30s were built over the nine-year production run; however, a number of them were sold as Quest 30s, which was essentially a sail-away, bare-hull kit boat, and the purchaser completed the interior and the fitting out.

For this report, we checked out a 1980 Hunter 30 (hull #934) and a 1978 model (hull #568). In contrast to later Hunters, the early Cherubini-designed models were conservative and conventional in design. The longer sister models-the 33 and 37-were, in our opinion, good-looking boats, moderately styled, with an attractive bow line and sheer, and a pleasing coachroof. The smaller boats, the 25 and 27, instead traded in some styling characteristics in order to pack a lot of room into a short waterline, which left them with higher-sided with boxier cabinhouses.

The 30 lies somewhere in between-handsome from some angles but a bit too flat in the sheer and high in the cabintop to impress traditionalists. Still, most of those traditionalists would consider it a much more attractive boat than the modern Euro-styled Hunters.

The 30s hull is very full-to maximize interior space-but otherwise, its quite typical of the racer-cruisers of the 1970s. Overall, the boat is 29 feet, 11 inches long-the maximum allowable length under the then-popular Midget Ocean Racing Club (MORC) rule. The short overhangs result in a long waterline, fundamental for sailing speed. The beam, at just a hair over 10 feet, is moderate by 1970s standards, but narrow in comparison to the big 30-footers that have appeared since. The Catalina 30, for example, is nine inches wider, and many current boats carry a foot more beam (and carry it further aft) than the Hunter 30.

A conventional fin keel, drawing 5 feet, 3 inches, was standard, with a 4-foot shoal keel as an option. We test-sailed the deep-keel version, and suspect it is much to be preferred, unless you absolutely need the shallower draft. Company literature lists the displacement and ballast as identical on both models. That would make the shallow-keel version more tender, requiring crew to reef early as the wind pipes up.

The foredeck is on the smaller side for anchor work and sail handling because the cabinhouse extends quite far forward. The 1978 and later models have an anchor well built into the foredeck that is self-contained and large enough to hold over 400 feet of rode, or enough for two anchors. The test boat we sailed had a furling jib, a desirable option in view of the smallish foredeck.

A significant shortcoming of the boats design is the narrow sidedecks. The wide cabinhouse makes it clear that the designers top priority was interior room, with deck work being a distant consideration. Its near impossible to get past the chainplates, especially on the leeward side when under a press of canvas, without climbing atop the cabinhouse.

The boat has a good cockpit, a bit smaller than some other 30-footers (again, a result of maximizing cabin space). A wheel was standard on the boat; its small, which is good for moving around the cockpit, but less than ideal for helming, in our opinion

A T cockpit became standard following the 1980 models, and some people preferred that arrangement; however, you could lie down on the older bench seats, and you can’t with the T. The bench seats would benefit from some sort of drain arrangement since they trap water. A deep lazarette behind the cockpit offers additional on-deck storage.

A peculiarity of the decks on the early Hunters is that the nonskid pattern was not molded in as is customary on fiberglass decks. Instead, a nonskid aggregate was painted on. Given the age of the Hunter 30, the original aggregate is likely long gone, and owners have had to apply fresh nonskid paint or nonskid mat. Fortunately, such a repair is straightforward and an easy (although time-consuming), do-it-yourself project (see PS August 2008 and November 2013 online).

On the boats we examined, there was minimal sail-handling equipment on deck-one pair of jib-sheet winches, a small halyard winch for the jib, no winch for the main halyard, no Cunningham or vang, no control lines on the traveler, no flattening reef, a single jiffy reef block, two jib lead blocks out on the toerail, and no backstay adjuster. However, most H30 owners have added deck gear over the years, including a running backstay, so what youll find on Hunter 30s today will run the gamut. A large number of Hunter 30 owners who responded to our survey reported that their boat was rigged for singlehanding, making it easy to sail with a short- or single-handed crew.

The original Hunter 30 owners manual was a great example of a good, clear, simple manual. It has always amazed us how many other boat builders provide the buyer with little or no printed information. If you happen to own or buy a Hunter 30 (or pretty much any older Hunter model) thats missing its manual, simply download the PDF of the original from the Hunter-Marlow website.

courtesy of Kasi McCain

The 30s interior was a strong selling point for the Hunter 30. Almost every owner that responded to our survey commented on the size of the boats interior-often relative to low price-when talking about their reasons for buying the 30.

The interior is well laid out, but plain. Theres a lot here for the money, however. Some of the original details could use changing-the alcohol stove, lack of vents, and small water tank-and many owners have upgraded or modified these systems.

The Hunter 30s layout is conventional, with a good V-berth forward, then a head with small hanging locker opposite, settee berths on each side of the saloon with a double, a drop-leaf table in the middle, an L-shaped galley, with the sink underneath the companionway, and a quarter berth, with a small chart table at its head. The berths are of good size, and on some boats, the port settee can convert to a double berth.

The head area is roomy with enough space for comfortable showering and a door for privacy. The interior also offers lots of storage for a boat this size: The hanging locker can accommodate plenty of clothes and has an overhead shelf; and there are three large storage lockers in the V-berth, plus a host of drawers and under-seat storage in the saloon.

The icebox on the boat we looked at had minimal insulation and would benefit from several more inches all around. Many owners reported having upgraded with icebox conversion kits.

The deckhouse is high and wide, and this gives a look of spaciousness below. The white hull liner overhead helps offset the extensive teak veneer on the bulkheads, ceilings, sole, and furniture.

There are adequate ports and hatches to allow in enough light. The opening portlights-Hunter was one of the first production boats to offer numerous opening ports as standard-offer good ventilation. If youre considering buying a Hunter 30 that has not had any ventilation upgrades, you will probably want to add some Dorades or solar vents to keep the air moving when the ports and hatches must be closed.

The finish downbelow is typical of low-cost production boats, which depend on pre-fab components that can be rapidly installed in the hull. In our owner surveys, there were a great many complaints about the original joinerwork, door hinges, and hardware. The original cabin sole was made of teak veneer, so in instances of water damage, it often cannot be repaired but must be replaced.

For the first four years of the Hunter 30s production, a 12-horsepower Yanmar diesel was standard. After 1978, standard power was a 15-horsepower Yanmar, followed by an 18-horsepower Yanmar.

The 12 was a particularly noisy engine; the later models were less so. Most of the owners who completed our survey thought the engines were minimal for powering the boat, especially in any kind of head seas; however, by traditional standards, even the 12-horsepower model should be adequate for the weight and length of the boat. Although the 12 is highly praised for its reliability, many people will find the later Hunter 30s to be more desirable because of their larger, smoother-running engines.

Engine accessibility was criticized by almost all of the owners who completed our survey. Access is awful, said one. You must be a left-handed midget to work on this engine.

We thought accessibility was far from ideal, but not excessively bad for this size boat. With a big interior and a small cockpit, its hard to stuff an engine under the cockpit sole without cramping.

The Hunter 30 we sailed (with a Yanmar 12) was well behaved under power; it backed nicely, turned crisply, and drove through strong winds (in protected water) with no problem. Our impression was that the engines vibration and noise were more of a concern than its power. Anyone buying the boat with the Yanmar 12 will probably want to spend the time to get perfect alignment. Wed also look closely at the engine mounts and the shaft-strut mounting.

Some owners have re-powered their boats, usually opting for a Yanmar 2QM15 or Yanmar 2GM20F diesel with good results. A two-blade solid prop was standard, but a number of owners refitted the boat with a three-blade solid prop to improve powering. We doubt if the gain would offset the loss in sailing ability.

Theres a full skeg ahead of the rudder. If you have to remove the propeller shaft for some reason, youll have to remove the engine first, or tear the skeg off. On the shoal-draft version, the skeg also is something of a grounding vulnerability as the rudder is about as deep as the foot of the keel.

We were pleasantly surprised by the sailing performance of the Hunter 30. We sailed one in a long, triangular race-two triangles, then windward-leeward-windward legs-in heavy air, a little over 20 knots at the start.

Considering that the test boat had almost no sail controls and old sails, and that the underbody was rough and a bit weedy, the boat moved very well, going to weather respectably in a serious racing fleet, and reaching and running competitively.

The jib we used was the 130-percent genoa on roller furling, and this was about right for the boat in those conditions. When the wind faded near the end of race, the boat was clearly under-canvassed.

The boat is slightly under-rigged with its short mast. To sail well in light air, especially with the solid prop that most 30s have, a sizeable genoa is required. One Florida Panhandle-based owner reports that she sails with a 155 or 170 genoa, both of which are ideal in light winds and can be reefed with furling if the wind picks up. This boat sails nicely and does better in higher winds than light wind. …. It responds very quickly when tacking and can almost sail itself in steady winds, she explained.

We agree: The 30 is a good sailing boat, responsive and easy to steer. Its PHRF rating of 186 (New England fleet) would probably be very favorable. If the boat were rigged with a full complement of sail-handling gear and modern sails, it should be able to stay with other 30-footers of the same era, such as the Pearson 30, Catalina 30 (not the tall rig), and ODay 30. Since sailing is what sailing is all about, our opinion of the Hunter 30 was improved dramatically when we took a first in the races main-and-jib class.

Conclusions

The Hunter 30 was a boat built to a price point-to appeal to the sailor who wanted a lot of boat at an affordable price.

As long as a buyer understands that, not expecting custom quality at barnyard prices, the Hunter 30 can be a good value in a used boat. Many on the used market today have been repowered and had systems upgrades added like refrigeration. Be sure to look for delamination issues, check the nonskid, and examine the cabinhouse around the mast for sagging, as many of these Hunters have had compression post issues.

Its easy to pay too much for a used boat these days, but for a good-condition, roomy coastal cruiser that can make a good showing around the buoys, the Hunter 30 can be had at a decent price-a lot of cruisability for minimal investment. Youll find Hunter 30s on the used-boat market to be priced about the same as comparable boats (Catalina 30 and Pearson 30), with an average pricetag of about $13,500.

Pros -Many have been re-rigged for easy singlehanding from the cockpit -Roomy cockpit for a 30-footer -Minimal topside brightwork -Sizeable anchor well on deck -Many have been upgraded to furling headsails -Handholds run the full length of cabin

Cons -Limited foredeck space -Very narrow sidedecks -Standard, original ventilation was lacking, needs upgrades -Pre-1980 bench seats trap water, need drain added

Hunter Marine built the 30 with an aim to maximize interior space. 1. The galley came standard with an alcohol stove, a deep ice box, and a small sink; many owners have updated the cooktop and added some type of refrigeration. The sink is too small to effectively wash dishes. 2. The settees offer full-length berths. 3. The H30 fits a fair bit of interior storage in a small space, including drawers behind and under the settees. 4. The V-berth has additional storage under the bed, which is large enough to comfortably sleep two (friendly) adults. 5. A very small nav desk and a full-length quarter berth are situated to port of the companionway. Electronics can be mounted inside the companionway.

In construction, the Hunter 30 is very conventional—an economical, solid-glass layup in the hull and a balsa-cored deck with plywood for backing under cleats. A conventional flange, with a through-bolted aluminum toerail joins the hull and deck together. The basic construction is quite a contrast to that of present-day Hunters, which can generally be described as highly engineered and Euro-styled, at the opposite end of the spectrum from the early Hunters like the 30.

Testers’ opinion of the fiberglass work was that it was good but a little light—marginal for offshore sailing but strong enough for typical coastal cruising.

On one of the Hunter 30s we looked at, there was extensive delamination of the cockpit sole and the bench seats. There also were signs of sloppy glass work—ragged edges and un-resinated glass—in compartments and other out-of-sight places.

Quality-control problems also were cited by a surprisingly high number of the Hunter 30 owners we surveyed for this article. The problems often mentioned included improperly hooked-up fuel-return lines, chafed hoses, leaking ports, poorly fitted hatch boards and lazarette covers, improperly installed exhaust systems, and so on.

The Hunter 30 compares favorably, in price and performance, to other production boats in the same size range and of similar vintage.

• Marlow-Hunter
• Hunter Owners Group

RELATED ARTICLES MORE FROM AUTHOR

Great review and enlightening! Thanks for your knowledge!

Great coverage on the 30! I owned a Hunter 30 1994-2000. Live aboard at Harbor Island San Diego. Very nice experience. Yes, the Yanmar 15 was a bit noisy. I thought For a while there was mechanical issues but Found out it was it’s nature.

Good article. I bought a 1977 Hunter 30, and it does sail surprisingly well for a older production boat. The engine works okay but is a bit noisy. It will soon be for sail as my daughter is the sailor and moved overseas for college.

Almost 40 years in my 1978 27 ft. Your comments were all on the mark. The original 8 hp gave out after 30 years and repowered with the 15 hp and replace the packing stuffing box with seal. Replaced the ports in the head and vee. For the time available I had to sail it worked out well. Fifteen years on Great Lakes and 22 plus in FL.

LEAVE A REPLY Cancel reply

Log in to leave a comment

Latest Videos

The Perfect Family Sailboat! Hunter 27-2 – Boat Review

Pettit EZ-Poxy – How to Paint a Boat

The Boat From True Spirit – Sparkman & Stephens

Top 5 Boat Hacks – Boat Maintenance Tips and Tricks

Latest sailboat review.

• Privacy Policy
• Do Not Sell My Personal Information
• Online Account Activation
• Privacy Manager

• Forums New posts Unanswered threads Register Top Posts Email
• What's new New posts New Posts (legacy) Latest activity New media
• Media New media New comments
• Boat Info Downloads Weekly Quiz Topic FAQ 10000boatnames.com
• Classifieds Sell Your Boat Used Gear for Sale
• Parts General Marine Parts Hunter Beneteau Catalina MacGregor Oday
• Help Terms of Use Monday Mail Subscribe Monday Mail Unsubscribe

Trolling motor for 17 foot Hunter?

• Thread starter Marlene
• Start date Mar 21, 2013
• Hunter Owner Forums
• Day Sailers

We purchased a 17' Hunter at the end of last summer. We had difficulty hoisting the sails, as the wind kept pushing us back to the marina. We are considering a small trolling motor to get us away from the dock, so this action can be completed safely. My concern is: would the motor interfere with the rudder? Hunter does sell a motor mount, so this probably isn't an issue? Does anyone have any experience/advice? We sail Kentucky Lake. We used to sail Lake Michigan on a Catalina 22 with a trolling motor. We would sail out of the harbor prior to hoisting the sails. I truly appreciate any input or advise.  

Plenty of threads on this topic, but I've had the same experience. I sail on a small, narrow lake that has high bluffs all around, so sailing to and from the dock can be difficult as the wind changes direction and changes in intensity. I decided to get a motor right away, and purchased a low-hours but clean Honda 2 hp from a guy. Unfortunately it took me all season to get the motor mount; I didn't have it in my hands until a week after I put my boat in storage. I'm waiting for things to thaw before I attempt the installation - sure don't want to crack the hull! I'm really looking forward to being able to motor away from the dock. There are a couple launch sites on the lake that most days I can't use because they are so well protected from the wind that I can't make it out to the main body of the lake. I've also gotten stuck in some quiet bays because there's no wind in them. I'm also looking forward to trailering to either your lake or Carlyle Lake so I can have some bigger, open water to sail on instead of constantly tacking and gybing my way around.  

On the occasion I use my motor (2hp Honda short shaft) I lift the rudder with the rope pulls so that the end is still in the water but doesn't hit the prop. I usually just point the motor straight and steer with the rudder.  

My 2.5hp mercury does not seem to interfer with the rudder on my 170. Most of the time the motor is locked and I steer with the rudder with the motor coming to play only at slow speeds. No slashes in the rudder thus far.  

As noted, first you're going to need a motor mount. For my 2 cents, you should have it mounted by a dealer to make sure it is securely fastened to the hull. There is a bit of torque applied to the hull when the engine "goosed" and you don't want the motor mount coming loose. I've got the Honda 2HP air cooled engine that will push my 170 close to 6 MPH at full or nearly full throttle. These engines are pricy (around $1200 for a new one). You might be able to find a decent used engine if price is a consideration. However, I highly recommend getting one with an idle feature. Slow the engine down to idle and the prop stops spinning. Since these small engines typically don't have a shift lever (forward, neutral and reverse), IMHO it's very important to have the "idle" feature. Otherwise, as soon as the engine is running, you're MOVING and you might not be ready for that. I tried an older 2HP engine without the idle feature and I found myself bumping into other boats when I wasn't ready to move. This kind of engine works fine when you're OUT there, but starting from a dock and other congested areas, it's not the best thing to happen. I use my engine to get off my mooring and when I get about maybe 300' out, I pop up my main and only then, shut off the engine. I then tilt the engine up to that I'm only using my ship's rudder.  

Motor mount is fastened with stainless wood screws using a block of plywood embedded in the upper deck foam. Beyond using normal precautions to keep water intrusion in check, it's not difficult. Your comment about proper torque is correct to the extent that one does not want to damage the wood.  

36lb Thrust I used a 36lb thrust Minkota when I had my H170. Worked well. I think the only time the plastic prop hit the rudder was if each were turned toward each other. JerryA  

• This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register. By continuing to use this site, you are consenting to our use of cookies. Accept Learn more…